Page 31 - Renco Ace Hardware: 2013 Husqvarna Product Range

31
HG3 HI5 HI10 VH5 VH10 NXS
MATERIALTO CUT
Granite ● ― ― ― ― ―
Marble ● ― ― ― ― ―
Cured concrete ● ● ― ● ● ―
Reinforced concrete ● ● ― ● ● ―
Brick ● ● ― ● ●
Roof tile ● ● ― ― ● ●
Abrasive material ― ● ● ― ― ●
Asphalt ― ● ● ― ― ●
Ductile iron ― ― ― ― ―
● = Optimal ● = Good ● = Acceptable – = Not recommended
Blades for all types
of cutting jobs.
A blade’s properties are determined by the application, the
material to be cut and the machine to be used. For maximum
work efficiency and cost-effectiveness, you should choose a blade
with the properties that suits the job you are about to do. The
Husqvarna Diagrip™ series is our top performance diamond
blades, designed for professional users and efficient, frequent
cutting. The Husqvarna MT series is our balanced performance
blades, designed for occasional cutting.
Diagrip™ ensures an optimal
distribution of the diamonds
and holds them in the segment
longer. The result is blades with
superior cutting capacity,
longer life and a smooth,
rapid cut.
“Easy-fit”, a bushel for bore
hole expansion. Remove the
bushel and you go from a 20.0
to a 25.4 mm bore.
HUSQVARNA VH10
VH10 blade is for maximum life, general
purpose cutting of block, abrasive block, soft
brick, concrete pavers and green concrete.
Diameters 12, 14 and 16 in.
HUSQVARNA HI10
The HI10 is for extra long life cutting of asphalt,
asphalt over concrete and some abrasive green
concrete. It features three laser welded
recessed segments for undercut protection.
Diameters 12, 14 and 16 in.
HUSQVARNA DIAGRIP™ HG3
The Diagrip™ HG3 is a fast, smooth cutting
blade for a wide variety of materials, including
heavily reinforced concrete. Diameters 12, 14
and 16 in.
HUSQVARNA NXS
The NXS blade cuts metal, concrete, stone,
rebar and brick/block.This blade incorporates
a thicker core with cooling holes and an
extremely fast segment. Diameters 12, 14
and 16 in.
HUSQVARNA VH5
TheVH5 blade is a general purpose blade for
cutting cured concrete and brick. Diameters
12, 14 and 16 in.
HUSQVARNA HI5
The HI5 blade is used for fast cutting
of a wide variety of materials on the
first pass, such as cured concrete and brick.
This all-purpose diamond blade has aggressive
notched segments that grab and grind material
for a rapid first cut. Diameters 12, 14 and 16 in.
POWER CUTTERS